Skip to main content

How Do You Replace Garage Door Rollers?

Many people are interested in learning how to replace garage door rollers. Modern garage doors include four or five pieces that span the whole width of the garage door opening and are connected by hinges. 


There is a roller mount on each hinge bracket that directs the garage door tracks on either side of the garage door. Along the guide tracks, both rollers assist in raising and lowering the garage door. 


Today, Dynamic Door Service will go through the procedures for replacing garage door rollers on both the top and bottom of the garage door.


Garage Door Roller Replacement By Dynamic Door Service


Disclaimer: This information is provided for educational reasons only; garage door roller replacement should only be performed by experts with experience and skill in the industry, such as Dynamic Door Service.


Steps To Replacing A Top Roller


  1. With an electric door opener, if you have it, close the garage door. After pulling on the door’s release handle, click the garage door’s remote button to allow the garage to raise the opener’s carriage. Finally, disconnect the garage door opener’s electrical cord from the outlet immediately after the carriage has stopped moving.


  1. Next, you want to unfasten the bolt that helps secure the top roller mount to the door. This can be done with a socket set. Slide the retainer bracket, making sure to do it with the roller attached from the mount.


  1. After, insert a brand new roller into the bracket. You want to position the roller at an angle and then just slip the roller’s front edge into the track. This should be done before rotating the axle toward the garage door and aligning the bracket with the bolt that is on the mount.


  1. Finally, plug the opener back into its outlet. Press the button on the garage door’s remote to lower the carriage. Lower the garage door until it connects with the door’s carriage arm. Now that it is complete, it is best to test the new roller’s operation by raising and lowering the door!


Steps To Replacing A Bottom Roller

  1. First, you want to raise your garage door. Disconnect the opener’s power cord from the electrical outlet. To release the carriage, you want to pull the rope handle.


  1. Next, you want to place a C-Clamp on the track. The C-clamp is going into the track that is opposite to the side of the door where you want to replace the roller.


  1. After, you need to locate the intersection of the vertical, straight track, and the 90-degree elbow section of the track. This will be beneath the damaged roller. You want to bend the curved lip part of the straight track area that is beneath the intersection. This can occur with a pair of slip-joint pliers. Doing this will allow you to have a width that is enough to have the roller slip out of the track.


  1. Now, you want to roll the door down until the roller centers into the broadest part of the channel’s bend. You must use your hands to bring the garage door down.


  1. After, you want to place a screwdriver between the curved edge of the roller and the channel. Push the roller out of the track by prying on the screwdriver. You want to pull hard on the corner of the door inward until you see the roller clear the track.


  1. Furthermore, you will now slip the old roller out of its axle mount. Carefully slide the new roller into the mount. Push the door back into its position adjacent to the track. Cautiously, slide the roller back into the track.


You want to slide the garage door upward so that the new roller is within an elbow portion of the track. It is vital to straighten the curved track section with a hammer to help return it to its original condition. If need be, repeat the process with the other bottom roller.


Final thoughts

A garage door roller replacement is a lot of work, and you should not put yourself in danger by performing it on your own. If you need a garage door roller replacement, you have come to the right place! 


Dynamic Door Service the best garage door company in Arizona has the experience and expertise to replace your garage door roller with a new one that works. 


Dynamic Door Service
Dynamic Door Service


We are your local garage door experts in Mesa and Tempe, Peoria, and we want you to be safe while the professionals do the hard work. Call us today at (602) 335-1077. You can also visit our website at https://www.dynamicgaragedoorrepair.com.


Comments

Popular posts from this blog

What Is An Ideal Garage Door?

An ideal garage door isn’t going to be the same for everyone. Being humans, we all have different tastes and wants. We don’t just buy one type of car or eat the same type of food every day.  The same thing goes with garage doors. Many may like fancy, wooden garage doors, while others may enjoy two-door garage doors. Some of us may just like a traditional garage door seen in the old-time movies.  Whatever taste you may have, Arizona Garage Door Guru top rated garage door company in Arizona that can help you decide which garage door suits you. With easy installation, we can help you build the garage you deserve.  Ideal Garage Door Installed By Arizona Garage Door Guru Today, we will be looking at different garage doors and guiding on which is an ideal garage door for your home.  Garage #1: CHI® Model #2240 The short panel garage door is the most typical type of garage door we install. A short panel garage is one that has squares that run the length of it. Model #2240...

The Pros and Cons of Garage Door Windows

Are you seeking to select between a garage door with windows and one without? There is no right or wrong solution, but you should weigh the advantages and disadvantages of having windows in your garage doors before purchasing one. Pros and Cons of Garage Door Windows Pros of Garage Doors With Windows Is the cost of the windows justified? Sometimes. There are advantages and disadvantages to purchasing garage doors with windows or putting windows on your garage doors. The following are some of the benefits of purchasing a new garage door with windows: Natural light : Garages are naturally dark, and by adding windows to your garage doors you can bring in natural light. You’ll have less need to turn the lights on in the garage because of it, which also saves on energy costs. If you want to use your garage as a workout location or plan to employ the workbench for home improvement projects, remember that creating a brighter space with natural sunlight will make the area more appealing and he...

How to Optimize Your Google Map Listing (2021)

C ustomers can use a Google Map listing to connect with local companies that provide the services and retail products they require. Without realizing it, you've probably already interacted with dozens of Google Map results. If you've ever looked for a local car repair shop on Google, there's a decent chance you've come across a Google Map listing. If you haven't already done so, here are a few things Position Punisher LLC thinks you can do right now to boost your Google Map listing's search engine relevancy and drive more visitors to your website and business. Google Map listing By Position Punisher LLC  Claim the Listing Your company may have a Google Map listing and not even realize it. Many Google Map listings are not generated by a business owner but rather compiled from the information Google has access to. The first step is to see if your business already has a listing created by Google. If it does and no one else has claimed it, you can select the butto...